Thiết bị router MikroTik RB2011UiAS-IN, khi só sánh với dòng router MikroTik RB2011L, ngoài việc có 5 cổng Gigabit LAN và 5 cổng Fast Ethernet LAN, còn được trang bị 1 cổng RJ45 serial, cổng microUSB và trang bị nhiều bộ nhớ RAM hơn (128MB thay cho 64MB). Ngoài ra, MikroTik RB2011UiAS-IN trang bị hệ điều hành mạng RouterOS L5 (thay cho L4 của dòng RB2011L) và màng hình cảm ứng dùng để cấu hình cơ bản thiết bị. Router MikroTik RB2011UiAS-IN còn được trang bị 1 cổng SFP (chưa bao gồm module SFP). Khuyên dùng cho hệ thống mạng tầm 100 người dùng Internet đồng thời.
Mã sản phẩm: RB2011UiAS-IN
Đơn giá: Vui lòng liên hệ
Điện thoại: (028) 38682371
Hotline: 0917 39 7766
Email: info@switch-router.com
Product code | RB2011UiAS-IN |
SFP DDMI | Yes |
CPU nominal frequency | 600 MHz |
CPU core count | 1 |
Size of RAM | 128 MB |
10/100 Ethernet ports | 5 |
10/100/1000 Ethernet ports | 5 |
Wireless chip model | AR9344 |
Number of USB ports | 1 |
Power Jack | 1 |
Supported input voltage | 8 V - 30 V |
PoE out | Yes |
PoE in | Yes |
Voltage Monitor | Yes |
PCB temperature monitor | Yes |
Dimensions | 214mm x 86mm for PCB |
Operating System | RouterOS |
Tested ambient temperature | -35C to +65C |
License level | 5 |
CPU | AR9344 |
SFP ports | 1 |
USB slot type | microUSB type AB |
Serial port | RJ45 |
Storage type | NAND |
Storage size | 128 MB |
RB2011UiAS-IN | AR9344 1G&100M all port test | ||||||
Mode | Configuration | 1518 byte | 512 byte | 64 byte | |||
kpps | Mbps | kpps | Mbps | kpps | Mbps | ||
Bridging | none (fast path) | 122.0 | 1,481.6 | 232.0 | 950.3 | 269.6 | 138.0 |
Bridging | 25 bridge filter rules | 83.6 | 1,015.2 | 86.0 | 352.3 | 87.6 | 44.9 |
Routing | none (fast path) | 122.0 | 1,481.6 | 210.0 | 860.2 | 226.9 | 116.2 |
Routing | 25 simple queues | 100.5 | 1,220.5 | 103.9 | 425.6 | 106.6 | 54.6 |
Routing | 25 ip filter rules | 56.8 | 689.8 | 59.6 | 244.1 | 60.5 | 31.0 |
1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544) | |||||||
2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes | |||||||
3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out | |||||||
4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results |