Cisco CVR100W-E-K9-EU
Đăng ngày 25-09-2015 Lúc 11:21'- 6907 Lượt xem
Giá: 1 VND / 1 Chiếc

Table 1.System Specifications,

Features Description
WAN One 10/100 Mbps RJ-45 connector for WAN port
LAN Four 10/100 Mbps RJ-45 connectors for LAN ports
Wireless Built-in 802.11n wireless access point (two antennas)
LED LAN1-4, WPS, Wireless, WAN, Power, and Do-Not-Disturb indication
Buttons/switches Power, RESET, WPS, Wireless, and Do-Not-Disturb mode control
Do-Not-Disturb button The Do-Not-Disturb button is used to turn the LEDs on the front panel on and off. Turning this button on or off will not affect the normal operation of the CVR100W.
  • When this button is turned on, all lights on the front panel are off and the Do-Not-Disturb indication light on the back panel is solid green.
  • When this button is turned off, all lights on the front panel are on and the Do-Not-Disturb indication light on the back panel is off.
Product dimensions (W x H x D) 106 in. x 94 in. x 26 in. (270 mm x 238.6 mm x 66 mm)
Weight 0.84 lb (0.38 kg)
Power supply 12V/0.5A
Cabling type Category 5e or better
Certifications SRRC, CE, CB, Wi-Fi
Operating environments
  • Operating temperature: 0° to 40°C (32°to 104°F)
  • Storage temperature: -30° to 60°C (-22° to 140°F)
  • Operating humidity: 10% to 85% noncondensing
  • Storage humidity: 5% to 95% noncondensing


Table 2. Product Specifications

Features Description
Routing
  • Static routing
  • Routing Information Protocol (RIP) versions 1 and 2
  • Inter-VLAN routing
Layer 2
  • 802.1Q-based VLAN
  • 6 active VLANs (VLAN ID Range: 4 to 4094)
Layer 3
  • Dynamic Host Configuration Protocol (DHCP) Server
  • Point-to-Point Protocol over Ethernet (PPPoE)
  • Point-to-Point Tunneling Protocol (PPTP) pass-through
  • Layer 2 Tunneling Protocol (L2TP) pass-through
  • DHCP relay agent
  • IGMP proxy and snooping
  • Dynamic Domain Name System (DynDNS): oray.com and 3322.org
  • Network Access Translation (NAT) and Port Address Translation (PAT)
  • Port management
  • Port mirroring
IPv6
  • IPv4/IPv6 dual stacks
  • IPv6 to IPv4 tunneling
  • Multicast Listener Discovery (MLD) for IPv6 (RFC2710)
  • Stateless address auto-configuration (SLAAC)
  • DHCPv6 Server for LAN IPv6 clients
  • DHCPv6 Client WAN connection
  • Internet Control Message Protocol (ICMP) version 6
  • IPv6 static routing
  • RIP Next Generation (RIPng): IPv6 Dynamic Routing
Security
  • Stateful packet inspection (SPI) firewall
  • Port forwarding and port triggering
  • Access control lists (ACL) and content filtering
  • DoS prevention
  • Wireless MAC address filtering
  • Static URL or keyword filtering
  • Access control by schedule
  • Web-based configuration utility (HTTP and HTTPS)
  • Self-signed SSL certificateuting
VPN
  • Up to 3 IPsec VPN tunnels by using the Cisco QuickVPN software
  • PPTP, L2TP, and IPsec VPN passthrough
  • 1 IPsec site-to-site tunnel
Quality of service
  • 802.1p-based priority on LAN ports and application-based priority on WAN ports
  • 4 queues
  • Differentiated services code point (DSCP)
  • Class of service (CoS))
  • Bandwidth control
Management
  • Local logs, system logs, and remote logs
  • Upgrade the firmware from the web-based device manager
  • Import and export system configuration (.txt)
  • Remote management using the HTTP or HTTPS protocol)
  • Bonjour and Universal Plug and Play (UPnP)
  • Network diagnostics: Ping, traceroute, and DNS lookup
Performance
  • NAT throughput: 90 Mbps
  • Maximum new connections: 750
  • Maximum concurrent connections: 15,000
  • VPN throughput: 5 Mbps


Table 3. Wireless Specifications

Features Description
Wireless radio

IEEE 802.11n wireless access point; complies with 802.11b/g

Wireless radio modes:

  • 802.11b: Direct-Sequence Spread Spectrum (DSSS)
  • 802.11g/n: Orthogonal Frequency-Division Multiplexing (OFDM)
  • 2 built-in omnidirectional antennas with 1.8 dBi gain

Wireless channels:

  • 13 selectable wireless channels
  • Automatic channel selection

Transmit power:

  • 802.11b: 17 dBm +/- 1.5 dBm
  • 802.11g: 15 dBm +/- 1.5 dBm
  • 802.11n: 12.5 dBm +/- 1.5 dBm

Receiver sensitivity:

  • -87 dBm at 11 Mbps
  • -71 dBm at 54 Mbps
  • -68 dBm at msc15, HT20; -66dBm at mcs15, HT40
Wireless adjustment
  • Press the Wireless button to enable or disable the wireless module
  • Adjustable Wi-Fi power: OFF, 50%, 100%
Wireless Distribution System (WDS) Up to 3 wireless access points to repeat the wireless signals
Wi-Fi Multimedia (WMM) WMM (802.11e) and WMM Power Save (U-APSD)
Maximum number of connected wireless client stations 32 active wireless client stations simultaneously
Maximum number of active SSIDs 4 active SSIDs simultaneously
Isolation Station isolation
Security
  • Wi-Fi Protected Setup (WPS) 2.0
  • Wired Equivalent Privacy (WEP)
  • Wi-Fi Protocted Access (WPA)-Personal/Enterprise
  • WPA2-Personal/Enterprise
Cisco Simple Connect Provides a safe and convenient way for smart devices to connect internet via CVR100W.