UBIQUITI Unifi AP-AC-IWĐăng ngày 06-11-2019 Lúc 11:13'- 2633 Lượt xem
Giá: 1 VND / 1 Chiếc
The UniFi AC In-Wall Access Point transforms an Ethernet wall connection into a dual-band 802.11ac Wi-Fi access point. It features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network. The UniFi AC In-Wall AP provides simultaneous, dual-band, and 2x2 MiMO technology.
Product Specifications
• Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01 ")
• Weight: 200 g (6.43 oz)
• Networking Interface: (3) 10/100/1000 Ethernet Ports
• Buttons: Reset
• Power Method: Passive Power over Ethernet (48V), 803.2at Supported (Supported Voltage Range: 44 to 57 VDC)
• Power Supply: UniFi Switch (PoE)
• Power Save: Supported
• PoE Out: 48V Pass-Through (Pins 1,2+; 3,6-)
• Maximum Power Consumption: 7W
• Maximum TX Power:
2.4 GHz: 20 dBm
5 GHz: 20 dBm
• Antennas: (1) Dual-Band Antenna, Single-Polarity
2.4 GHz: 1 dBi
5 GHz: 2 dBi
• Wi-Fi Standards: 802.11 a/b/g/n/ac
• Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• BSSID: Up to Four per Radio
• Mounting: 1-Gang Electrical Wall Box (Not Included)
• Operating Temperature: -10 to 50°C (14 to 122°F)
• Operating Humidity: 5 to 95% Noncondensing
• Certifications: CE, FCC, IC
Advanced Traffic Management
• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limiting
• Guest Traffic Isolation: Supported
• WMM: Voice, Video, Best Effort, and Background
• Concurrent Clients: 250+